{"product_id":"voryndel-fantasy-dildo-with-suction-cup","title":"Voryndel — Silicone Fantasy Horse Dildo with Suction Cup","description":"\u003cp\u003eVoryndel is a platinum silicone fantasy dildo with a gray-purple shaft and a pale pink root and sculpted base. Raised veins run along the body, continuing onto a rounded lower bulge above the folded root. A disc-shaped suction cup sits underneath the base.\u003c\/p\u003e\n\u003ch2\u003eRounded head and branching veins\u003c\/h2\u003e\n\u003cp\u003eThe rounded head has a pronounced rim around its lower edge. Just beneath it, the shaft narrows slightly before extending into the main body, creating a defined transition below the head.\u003c\/p\u003e\n\u003cp\u003eBranching veins extend across the shaft and onto the lower bulge. Longer ridges meet shorter offshoots and run in different directions, with flatter spaces between them. Some lines curve around the body while others branch toward the sides, leaving a combination of broader, flatter areas and finer raised lines across the surface.\u003c\/p\u003e\n\u003ch2\u003eLower bulge and sculpted base\u003c\/h2\u003e\n\u003cp\u003eNear the lower end, a narrower transition leads into a pronounced rounded bulge. This section is wider than both the head and middle in all three sizes, creating a concentrated increase in girth close to the root. Its diameter is listed separately so it can be compared alongside the head and middle measurements.\u003c\/p\u003e\n\u003cp\u003eBelow the bulge, the color changes to pale pink. Folded bands wrap around the root and lead into a testicle-shaped base with rounded forms and creased detailing. The suction cup sits underneath this sculpted base. The listed base width measures the overall form, including the testicle-shaped section.\u003c\/p\u003e\n\u003ch2\u003eFullness and vein texture\u003c\/h2\u003e\n\u003cp\u003eThe slightly slimmer middle may feel less full after the head, before the wider lower bulge brings another increase. Raised veins add smaller lines of texture along the way, broken up by flatter spaces between them. This design pairs changes in fullness with fine, branching texture; the size you choose and individual sensitivity affect how noticeable each feels.\u003c\/p\u003e\n\u003ch2\u003eSizes and measurements\u003c\/h2\u003e\n\u003cp\u003eS, M, and L retain the same design and color layout, with different lengths, diameters, base widths, and net weights. Insertable length ranges from approximately 6.30 in \/ 16 cm to 10.24 in \/ 26 cm, and the lower diameter ranges from approximately 1.57 in \/ 4.0 cm to 2.68 in \/ 6.8 cm. Separate head, middle, and lower measurements show how the girth changes along each size.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eMeasurement\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eS\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eM\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eL\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTotal length\u003c\/th\u003e\n\u003ctd\u003e7.87 in \/ 20 cm\u003c\/td\u003e\n\u003ctd\u003e10.24 in \/ 26 cm\u003c\/td\u003e\n\u003ctd\u003e12.20 in \/ 31 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsertable length\u003c\/th\u003e\n\u003ctd\u003e6.30 in \/ 16 cm\u003c\/td\u003e\n\u003ctd\u003e8.27 in \/ 21 cm\u003c\/td\u003e\n\u003ctd\u003e10.24 in \/ 26 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHead diameter\u003c\/th\u003e\n\u003ctd\u003e1.42 in \/ 3.6 cm\u003c\/td\u003e\n\u003ctd\u003e1.97 in \/ 5.0 cm\u003c\/td\u003e\n\u003ctd\u003e2.36 in \/ 6.0 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMiddle diameter\u003c\/th\u003e\n\u003ctd\u003e1.34 in \/ 3.4 cm\u003c\/td\u003e\n\u003ctd\u003e1.89 in \/ 4.8 cm\u003c\/td\u003e\n\u003ctd\u003e2.28 in \/ 5.8 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLower diameter\u003c\/th\u003e\n\u003ctd\u003e1.57 in \/ 4.0 cm\u003c\/td\u003e\n\u003ctd\u003e2.17 in \/ 5.5 cm\u003c\/td\u003e\n\u003ctd\u003e2.68 in \/ 6.8 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLower circumference — calculated\u003c\/th\u003e\n\u003ctd\u003e4.95 in \/ 12.57 cm\u003c\/td\u003e\n\u003ctd\u003e6.80 in \/ 17.28 cm\u003c\/td\u003e\n\u003ctd\u003e8.41 in \/ 21.36 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall base width\u003c\/th\u003e\n\u003ctd\u003e3.94 in \/ 10 cm\u003c\/td\u003e\n\u003ctd\u003e5.12 in \/ 13 cm\u003c\/td\u003e\n\u003ctd\u003e6.30 in \/ 16 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNet product weight\u003c\/th\u003e\n\u003ctd\u003e0.705 lb \/ 320 g\u003c\/td\u003e\n\u003ctd\u003e1.543 lb \/ 700 g\u003c\/td\u003e\n\u003ctd\u003e2.778 lb \/ 1,260 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDimensions and net weights are based on physical measurements of the product. Lower circumference was calculated from the measured lower diameter × π. Inch and pound values are approximate conversions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Platinum silicone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Kervyra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e KV-DIL-F016\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich diameter should I compare when choosing a size?\u003c\/h3\u003e\n\u003cp\u003eCompare the head and lower diameters together. The lower bulge is the widest listed shaft section; the middle measurement alone does not describe the whole profile.\u003c\/p\u003e\n\u003ch3\u003eHow much larger is each size?\u003c\/h3\u003e\n\u003cp\u003eFrom S to M, the lower diameter increases by approximately 0.59 in \/ 1.5 cm. From M to L, it increases by approximately 0.51 in \/ 1.3 cm. Insertable length increases by approximately 1.97 in \/ 5 cm at each step.\u003c\/p\u003e\n\u003ch3\u003eDoes total length include the base?\u003c\/h3\u003e\n\u003cp\u003eYes. Total length covers the complete product. Insertable length is listed separately for each size.\u003c\/p\u003e\n\u003ch3\u003eIs lower circumference measured with a tape?\u003c\/h3\u003e\n\u003cp\u003eNo. It is calculated from the measured lower diameter × π. It is a reference circumference for this sculpted, non-cylindrical shape.\u003c\/p\u003e\n\u003ch3\u003eIs base width the suction cup diameter?\u003c\/h3\u003e\n\u003cp\u003eNo. It is the width of the overall base. The measurement includes the testicle-shaped section.\u003c\/p\u003e\n\u003ch3\u003eAre the listed weights shipping weights?\u003c\/h3\u003e\n\u003cp\u003eNo. They are measured net product weights and exclude packaging.\u003c\/p\u003e\n\u003ch3\u003eIs S intended for beginners?\u003c\/h3\u003e\n\u003cp\u003eS is the smallest option in this model. The label does not establish suitability; compare the head diameter, lower diameter, and insertable length with dimensions you already find manageable.\u003c\/p\u003e\n\u003cp\u003eChoose S, M, or L using the full measurements above.\u003c\/p\u003e","brand":"Kervyra","offers":[{"title":"S","offer_id":44858455523406,"sku":"KV-DIL-F016S","price":47.99,"currency_code":"USD","in_stock":true},{"title":"M","offer_id":44858455556174,"sku":"KV-DIL-F016M","price":70.99,"currency_code":"USD","in_stock":true},{"title":"L","offer_id":44858455588942,"sku":"KV-DIL-F016L","price":105.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/2367\/8542\/files\/IMG_3236.webp?v=1794212510","url":"https:\/\/kervyra.com\/nl\/products\/voryndel-fantasy-dildo-with-suction-cup","provider":"Kervyra","version":"1.0","type":"link"}